5 Schenker Drive, Royal Park. South Australia. 5014
Ph (08) 8240 0777 Fax (08) 8240 0711
Int Ph +618 8240 0777 Int Fax +618 8240 0711
E-mail ceaco@ceaco.com.au

At C.E.& A. Co. you will find a small dedicated team of people who will do the best job possible for you. We have been designing, manufacturing and supplying quality marine equipment since the 1970's.
Each client is unique, as are their requirements and our designs are able to be customised to meet these varying needs. We design and manufacture to suit you, so if our 'standard' design does not fit, we can modify it to suit.
This level of care and attention sometimes takes a little longer to achieve the finished result, but costs no more. In many cases it will save you time and money in the long term.
Our philosophy is to do the right job right. Your safety and satisfaction is important and the right equipment helps to keep you and your vessel in the right place.
So whether you are building; a high speed patrol boat, 60m motor yacht or a 15ft pleasure boat,
talk to us about your requirements - we listen.
Please click on the links below to find out more about our equipment range.
Propeller Shaft Seals
Oil and Water Lubricated

The Rudder Carrier Bearing developed by C.E.& A. Co. is a simple, economical, low maintenance keyless system designed for easy installation on either spade or skeg supported rudders or nozzles.
Deck Machinery - Custom Designed and Manufactured
Multi-angled Roller Fairleads Roller Cable Stoppers Cable Lifters (Gypsies) Pedestal Rollers

Propeller Shaft and Rudder Bearings

Duramax - Thordon - Tufnol
Quality bearings material used and accepted worldwide. Different types of materials to suit different types of applications.

Benj. R. Vickers

Marine Lubricants - Hydrox and Neox
Vickers Marine Lubricants provide continuing lubrication and protection against corrosion even where water is present. Their ability to perform in the frequently hostile conditions presented by marine and offshore environments is recognised worldwide.
 

Propeller Shafts, Rudders and Rudder Stocks
Complete Sterntube Assemblies

No 'off the shelf' equipment here. All of this equipment is custom manufactured to suit each individual installation. Propeller shafting from 3/4" to 6".
All equipment is manufactured to Classification Society standards.
Rudders manufactured to naval architects drawings.

Propellers

In 2002, the well known South Australian, Tom Jenkins, decided to close the doors of his age old company - Jenco Engineering. To continue his work and to continue the service to his customers we purchased all his manufacturing patterns and started to manufacture propellers. Whilst we do not yet call ourselves 'experts' we are successfully producing propellers up to 20" diameter. We have for many years supplied propellers from other manufacturers including Mikado and Austral units. We still continue to supply either brand when we either do not have a pattern to suit or it is out of our size range.
 

Chockfast Orange

The Philadelphia Resins CHOCKFAST ORANGE epoxy based pourable compound, cures at normal temperatures to become an extremely tough and durable solid. Specifically developed for chocking marine main propulsion and auxiliary machinery. Since it's introduction in 1963 it has earned the approval of the major classification societies worldwide.

Spurs - Rope, Net and Weed Cutter

The principle that enables the shaft mounted "SPURS" to cut so effectively is the "screw action" created as the propeller turns, winding lines, nets or weed directly into "SPURS" blades, instantly cutting before allowing entanglement or damage to running gear. You won't even know its working.
Shaft mounted cutters are available for shafts from 3/4" to 6.1/2"
 

Fortress
Light Weight Aluminium Anchors

In test after test, from coast to coast and around the world, no other anchor in history has been called "The World's Best Anchor" by more boaters and respected marine experts then Fortress. Weighing only half as much as heavier steel anchors and yet these anchors out perform them all. Why? Because the Fortress design does not depend upon weight to provide world class performance.

 

COMPROP
4 Blade Outboard and Sterndrive Propellers

This 4 blade composite material propeller provides quicker acceleration, smoother running and better cornering than a conventional 3 blade aluminium propeller.
The Comprop comes in a range of sizes to suit most outboards and sterndrives. The Comprop material is very durable, for soft bottom/low speed use it resists the dings, folds and blunting common to metal propellers.

Poly Flex Engine Mounts and Couplings

Poly Flex engine mounts are specifically designed to provide vibration isolation for machinery while also providing high resistance to movement caused by dynamic loads, such as propeller thrust and lateral loads experienced in marine applications. The long-lasting Poly Flex Marine Couplings provide a highly effective shock-absorber between gearbox and propeller shaft.

 
Propeller Shaft Seals Rudder Carrier Bearings Benj. R. Vickers Spurs
Propeller Shaft and Rudder Bearings Chockfast Orange Fortress Comprop
Deck Machinery Poly Flex    

This web site has been optimised for Internet Explorer with a resolution of 1024 x 768
Site is designed and maintained by C.E.& A. Co. Pty. Ltd. - Last update April 2007